Home Theater Projector: Keep That Lamp Burning

Home Theater Projector: Keep That Lamp Burning

Increasingly, consumers who want to experience cinema-like viewing in their home opt for a home theater projector. These devices allow users to view their entertainment in a darkened room without the size restrictions of a television screen. However,

as most owners will attest to, there is a somewhat significant maintenance expense associated with this type of set up; the expense of the lamp.

Lamp life in a projector is said to be between 2,500 and 4,000 hours but in some instances consumers have reported a lamp life as short as just a few hundred hours. With lamp replacements priced at a few hundred dollars, the shortened life span of a lamp can be an unwelcome surprise. Buyers should take heart however as there are numerous things they can do to help assure their new lamp burns brightly for as long as possible.

? Keep the projector stationary when possible.
The filament within the lamp is fragile and is especially vulnerable to damage when it is hot; thus avoiding any jostling, especially when the unit is still hot, is important.

? Keep hands off of the lamp.
Bare hands can leave oils on the surface. The oils can get burned onto the surface of the lamp which can

cause cracking. Use of a tissue or soft cloth when removing/changing the lamp is wise.

? Turn the lamp off appropriately.

o Turn the lamp off about 5 minutes prior to turning off the projector. This allows the fan to cool the unit.

o Because turning the power on and off can stress the filament due to sudden voltage increase it is wise to avoid turning it on and off unnecessarily when taking a short break in viewing. Use of the "soft start" function can be beneficial if the projector has it.

o On the other hand, an auto standby feature can be useful to assure that the lamp is not inadvertently left burning when viewing is done.

? Keep it clean and cool.
Projectors should be housed to assure they are not near a heat source and have adequate venting. There should be nothing obstructing their air intake or exhaust vent. The filter should be cleaned every 3-6 months and changed per manufacturer guidelines to assure good airflow and to keep dust off of the lamp.

As with any light source, the lamp within a projector will eventually fail and need to be replaced. However, proper use and maintenance can help to assure that the projector lamp will realize its full life expectancy rather than placing any unnecessary burden on the owner's budget.
Article Directory: http://www.articledashboard.com

Christine Peppler believes that consumers should not have to possess a technology degree to be able to choose home electronics and entertainment devices. Take advantage of the wealth of simple to understand, useful information and shopping available on her website at www.homemedias.info.

Permalink: http://expert-talk.com/tips/634/home-theater-projector-keep-that-lamp-burning-106634.htm

Comments

SEND A COMMENT

PLEASE READ: All comments must be approved before appearing in the thread; time and space constraints prevent all comments from appearing. We will only approve comments that are directly related to the article, use appropriate language and are not attacking the comments of others.

Related Tips and Advices

Related Tags