Cisco TAC : An Introduction To The Cisco Technical Assistance Center

Cisco TAC : An Introduction To The Cisco Technical Assistance Center

The Cisco Technical Assistance Center (TAC) is Cisco's tech support center, and they've got some very talented people working there. Before you pick up the phone to call the TAC, though, you should do your best to resolve the problem and document each

step along the way. One of the first things the TAC will do is ask what you've done so far to resolve the issue, and giving them an accurate answer is a huge step toward getting the problem resolved.

If you're used to "tech support" where calls are prioritized by the order in which they come in, the TAC will open your eyes! Cisco's TAC uses four priority levels to determine which cases should be handled first:

Priority 1: The network is down, no workaround available, and business processes are at a critical stage.

Priority 2: The network is badly degraded, business processes are impacted, and no workaround is possible.

Priority 3: Network is degraded, but business processes are working for the most part.

Priority 4: Basic support call for installation or configuration, or information on Cisco products.

Once you open a case with the TAC, you can check the status of your cases online with the Cisco TAC Case Q

uery tool. This is an interactive tool which allows you to update the status of the case from your end without placing additional phone calls to TAC. It's also a faster way to let your TAC engineer know how your cases are proceeding.

Gather all the information you can BEFORE you call tech support. Don't just pick up the phone without investigating the issue.

This goes double for opening TAC calls. Some good practices to follow before calling TAC:

Document changes made before the issue arose.

Document changes made to configs AFTER the trouble occurred.

Document ping and traceroute results.

Make sure the log is large enough to keep errors and console messages that are resulting from the issue.

Depending on the technology, test everything you can before calling tech support. For Frame Relay, for instance, check everything between your site and the DCE closest to the site. (Trust me, that's the first thing they're going to ask you to do.) For ISDN, check the configurations carefully, and again check everything between your site and the provider.
Article Directory: http://www.articledashboard.com

Chris Bryant, CCIE #12933, is the owner of The Bryant Advantage, home of over 200 free certification exam tutorials, including CCNA certification training articles. His exclusive CCNA study guide is also available! Visit his blog and sign up for Cisco Certification Central, a daily newsletter packed with CCNA, Network+, Security+, A+, and CCNP certification exam practice questions! A free 7-part course, ?How To Pass The CCNA?, is also available, and you can attend an in-person or online Cisco CCNA training boot camp with The Bryant Advantage!

Permalink: http://expert-talk.com/tips/736/cisco-tac-an-introduction-to-the-cisco-technical-assistance-center-21736.htm

Comments

SEND A COMMENT

PLEASE READ: All comments must be approved before appearing in the thread; time and space constraints prevent all comments from appearing. We will only approve comments that are directly related to the article, use appropriate language and are not attacking the comments of others.

Related Tips and Advices

Related Tags